Select Page

Farm China john deere 606 gearbox Kota India Irrigation System with Center Water Supply with Two Wings From Factory with ce certificate top quality low price

Farm  China   john deere 606 gearbox   Kota India   Irrigation System with Center Water Supply with Two Wings From Factory with ce certificate top quality low price

We SIDE BY SIDE WITH OUR CUSTOMERS Consolidated experience and constant communication with customers. These are the pillars on which EPG’s expertise is based to develop products designed for: customised solutions to solve every problem and to meet every requirement promptly offering total quality. It has established stable cooperation with many well known universities and institutes in china such as, Zhejiang University, Jilin University, Technical committee of national chain drive standard, Institute of national chain drive, Zhejiang application engineering material institute, Huhan material protection institute; and it cooperated to found China First Car chain institute with National chain drive institute.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Adhering to "Survival by Quality, Development by Technology & Credit", The company will constantly improve product performance to meet the increasing customer requirements in the rigorous style of work. Established in HangZhou, China in 1990, EPG began as a manufacturer and exporter of investment casting, sand casting, die-casting and CNC machining parts (eg. Cylinder ends, valve bodies, screw cylinder, auto parts, marine parts etc.). In 2002, hydraulic pumps and parts research department was settled and company developed its first lines of hydraulic pumps and parts. Today EPG is reckoned as one of the most preferred experienced manufacturers and exporters of hydraulic pumps and parts in the industrial and Moving Equipment market.                 CENTER PIVOT IRRIGATION SYSTEM

PRODUCT INTRODUCTION
The DYP series center pivot irrigation system is made up of center trestle table ,trestle -tower vehicle ,sprinkler truss,endmost ,cantilever ,and synchronous system controlled by electric etc.
The center pivot irrigation system is especially applied in the irrigation of planing potatoes,suXiHu (West Lake) Dis.Hu (West Lake) Dis.canes,watermelons,legumes,economic crops and pasture.The automated irrigation system characterize high in efficiency ,Featuring in high efficiency ,power and water saving ,the irrigator can increase yield at economical cost with the spraying uniformity coefficient up to 85%,and take advantages of the uniform application of chemical and fertilizers .The center pivot irrigation system can also work on uneven fields with sXiHu (West Lake) Dis.Hu (West Lake) Dis.es of up 25%. All parts rust free in 15 years via zinc coating treatment. All running parts shall be operated under the main control system and the fault position shall be displayed when malfunction and /or interrution happens.
 
River and bore ept can be the water resource of the fixed point, the water transports through main pipes and sprinklers, finally applied to the field. The advantage of this irrigation system is to use less labor and water to irrigate 13-130ha from one water feeding point. Steel structure of special design can satisfy different lengths of the machine. One span with one overhang is the simplest machine you can choose for small land. The heavy duty design can be extend to more than 11 spans (650m) with the angles and bolt pivot anchors strong enough to figeptwindstorm.

SPECIFICATION

Items Specification Items Specification
Pivot length 41.1-791.2m Land covered 0.53-196.7ha
Qty.of spans 1-16 Span length choice 41.1/47.8/54.4/61.3m
Overhang length 6.7/13.4/20.1/26.8m Pivot clearance 2.91-3.75m
Span dia. 141/168/203mm Pivot height 4.62-5.46m
Span thickness 3mm Surface Hot dip galvanization
Flow rate 15-1080m3/hr Water pressure at pivot base 1-7.5Bar
Friction Loss 0-2.5bar Tire Rubber: 320X1260 mm
Plastic: 318X1170 mm
Max speed 142m/hr Sprinkler Nelson/Senninger
Regulator 10/15psi Type of drops Flex 5.5-ft drops
Gear box 50:1 heavy duty Gear motor 33rpm(full loaded) at 380V.3/4HP 40:1 Ratio. Over-heating protection
Control panel StHangZhourd Required run power 0.7-11.5kw
Power supply 380V 415V 50HZ 60HZ Irrigation Hours/Day 0-24hr/day
Daily applicationrate 0-50mm/day Pressure gage 0-60ps

FEATHERS
This center pivot irrigation system can even walk in the waving land.
1 Metallic zinc-coated Spans rubber-band united between itself
2 Mounted on support of intermediate towers-each with two wheels
3 -type, axles drive unit from electric geared motor to Wheels gearboxes
4 Electronic block of the system with equalization and checept
5 Control transformer
6 Monitoring indicators
7 Fuses - 30 amps
8 System monitors
9 Fused disconnect in panel rated 600v at 30 amps
10 Forward / reverse contactors rated 600v at 30 amps
 
Heavy duty gear box
1 Enhanced casing design, increase intensity, reduce wear and tear
2 Special seal, prevent dist and humidity
3 Large power output bearing, load capacity enhances 55%
4 High-strength cast iron, big gear design
5 Shorten driven wheel design, reduce extra load
6 High-strength caps pre-commitment load

PHOTOS OF IRRIGATION SYSTEM

COMPANY INTRODUCTION
HangZhou Harvest Machinery Co., Ltd is a leading manufacturer in China for irrigation equipments.
The main products of our company include center pivot irrigation system, fixed pivot irrigation system, towable center pivot irrigation system, lateral move irrigation system and small size center pivot irrigation system, and water hose reel irrigation machine.
We strives to provide first-class quality products and friendly service with rich experience of finish machining. 
 "Good Quality, Reptable Price, Best Service" is our goal. We warmly and sincerely welcome customers all over the ept to visit our factory and look forward to estabXiHu (West Lake) Dis.Hu (West Lake) Dis.ng long term cooperation and solid relationship to make mutual benefit.
For more information, please feel free to contact us.

PACKAGE AND DELIVERY
Spare parts packaged by the stHangZhourd exporting wooden box.
20", 40", 40"HQ, 40" open top, all available.

SERVICE                                         
1. Professional and quick response to your questions within 24 hours.
2. We will communicate with our production dept. and keep you updated about production progress in time.
3. Customized manufacture available for you.
4. Fast delievery to save your time.
5. Good after sale service will eliminate your worry.
6. Long guarantee period of the quality will reduce your cost and trouble.
7. Professional wooden case pacept and ept shipping control to make your order safe and sound.
8. Full sets of technical documents, instruction manual can be provided.

PAYMENT                                                                               
Wire transfer:  30% advance by T/T, 70% balance by T/T before shipment.
Letter of credit:  by irrevocable letter of credit at sight.
Western union:  it is a fast and safe way.

ept TERM                                                                                
We can do FOB, C&F and CIF for your choice.

CONTACT

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed windmill farm & craft market replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Farm  China   john deere 606 gearbox   Kota India   Irrigation System with Center Water Supply with Two Wings From Factory with ce certificate top quality low price

Farm  China   john deere 606 gearbox   Kota India   Irrigation System with Center Water Supply with Two Wings From Factory with ce certificate top quality low price

shaft car

As one of leading shaft car manufacturers, suppliers and exporters of products, We offer shaft car and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of shaft car

Recent Posts