We - EPG Team the most significant agricultural gearbox and pto manufacturing unit in China with five diverse branches. For much more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
AT collection with tri-lobe tube (triangular) The triangular tube shape is the most utilised, from light-weight to reasonably hefty purposes. In the situation of purposes with substantial sliding, the R model with Rilsan coating is also available. AL sequence with two-lobe tubes (lemon). --Driven (outer) yoke exact same as drive yoke but is mounted on the employ. There are two varieties of shafts, domestic and metric, which are identifiable by their designs. Domestic are usually 1 of four shapes: spherical, square, rectangle or splined. Metric are: bell, star or football formed. In either scenario the major (front) shaft is the identical form as the secondary shaft, only bigger so that the secondary shaft fits inside. This enables a telescoping impact to get area when the implement is elevated on the three pt. or during a turning motion this sort of as a bailer. All shafts have to be sized prior to use. Connect the apply to the three pt. and raise and support it. Connect the appropriate end to the tractor and try to attach the other to the apply. If the shaft is also lengthy trim a single of the shafts with a hack observed and try out it once again until it suits. This enables for the employ to be lifted without binding. The shafts should overlap as considerably as allowed.f350 front travel shaft sq720 bush hog EPG extending a pto shaft is pto shaft roll pin specialized tractor pto adaptors in low-cost driveshafts layout, 2006 jeep commander rear generate shaft company generate shaft u joint yoke and massey ferguson a hundred thirty five pto shaft alternative revenue carbon fiber driveshaft drag racing of agricultural equipment and farm implements, which has an unbiased import and export rights.
3WPZ-1200G type self propelled spray growth sprayer
3WPZ-1200G sequence of sprayer is ideal for spraying the medicament for the planter of bean, corn, cotton, grain.
Also for lawn,fruiter,vegetable, street facet tree. The potential could be 1200L, the spraying width could be 13.one-16m with 53hp.
Benefits:
•This variety of boom sprayer is a tractor mounted sprayer.
•Wide working scope,spraying for bean,cotton,corn etc.
•Wide spraying with to be 16m max.and the operating angle of this tractor sprayer could be adjusted.
•The potential of mounted boom sprayer could be modified to meet various require from the consumer.
Model | 3WPZ-1200G self-propelled spray increase sprayer | Pump Type | Plunger pump |
Engine Product | 4L68 (Changchai) turbocharged diesel motor | Pump Model | OS-5200 |
Power / Pace | 53 hp 2400r / min | Pump Force | 0-45kgf/cm² |
Displacement Amount | China III | Pump Stream | 220-240L / Min |
Gear | Forward equipment four,reverse gear one | Pump Pace | 600-800r / min |
Drive Method | Four-wheel generate | Tank Capability | 1500L |
Steering Manner | Hydraulic steering | Spray Peak | 0.five-three. m |
Mixing Method | Circulating h2o mixing | Nozzle Model | No.three |
Folding Technique | Hydraulic folding | Spray Angle | 110° |
Spray Width | 16 m | Nozzle Movement | 1.2L / min |
Vertical Peak | 1.8 m(customizable) | System Work Strain | 0.3-.5Mpa |
Wheel Observe | 1.ninety five-2.six m(adjustable) | 3 Filtration System | Tank inlet, pump inlet, nozzle |
Operating Performance | 21-30 acres / hour | Battery | 12v / 120AH |
Walking Speed | ≤25Km / h | Front Tire Product | Tractor tires 9.five-24 |
Overall Dimension | 5800 mm x 2900 mm x 3700 mm | Rear Tire Product | Tractor tires 9.5-24 |
Weight | 3811Kg | Water Tank | 15L |
Q:Are you a factory or buying and selling organization?
A:We are a manufacturing facility.
Q: How does your manufacturing unit do concerning good quality management?
A: Quality is priority. we always say great value to quality controlling from the quite commencing to the really finish.
Q: Do you have a merchandise accent?
A: Yes, we have the accessories of the solution.
Q:Can you personalize the item?
A:We can customize the merchandise.
Q: What's your payment terms?
A: Payment terms is T/T or L/C,We accept all reasonable payment.
Q: How about delivery time of your machine?
A: The delivery time is in 60 working days. It depending your quantity.
The use of first products manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the listed replacement parts contained herein are not sponsored, approved, or created by the OEM.