Select Page

Cyclo Drive Reducer

Cycloidal pinwheel reducer can be a up-dated of fresh type transmissing machine made with K-H-V less tooth engagement and the cycloidal pin wheel clenching system, which are trusted in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, Market, task machinery etc and conveyors. various fields.
Features:

1. Equipment is constructed of high power low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is adopted for all gears, good get in touch with performance and with great precision
2. high transmission proficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service lifestyle and high bearing capacity;
5. convenient to assemble, check and disassemble.

Operation specifications and precautions
1.High modularization design: various equip with various motor or other power type conveniently.Same machine type may equip with numerous power motor. It is easy to recognize the combination and
junction between every machine type.
2.Transmission ratio: great division, wide scope. The combined machine type may form large transmission ratio, i.e. end result suprisingly low rotary speed.
3.Form of unit installation: the positioning to be installed isn't limited.
4.High strength, compact: the box body is constructed of large strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing ability of unitvolume is huge.
5.Long life: Under the condition of correct type chosen (including choosing suitable operation parameters)normal procedure and maintenance, the life span of main parts of speed reducer (except wearing parts) shouldn't be less than 20000 hours. The wearing parts include lubricating oil seal, bearing and essential oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is certainly low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High quickness ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-downwards ratio and the efficiency is definitely a lot more than 90%. If employ multi-speed drive the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic transmitting principle, the input and productivity shaft are in same axis center, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can recognize high reduction ratio device.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged as well, and there are two gears engaged with 180 degree symmetry. Subsequently, the influence of tooth pitch mistake and cumulative tooth pitch error on the rotation accuracy is relatively average, which makes the position precision and rotation precision reach a very high level.
4. Less parts, easy installation
The three basic elements achieve a higher deceleration ratio, and they are all on the same axis, so the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the volume is 1/3, the weight is 1/2, but can obtain the same torque ability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel materials USES special steel with high fatigue strength.Different from ordinary transmission device, the number of teeth meshing makes up about relevant to 30% of the total quantity of teeth. In addition, it is in call with the surface, so that the pressure borne by each gear is reduced and high torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high decrease ratio can be achieved while maintaining high proficiency, and miniaturization of traveling motor can be realized.
8. Low noise
The gear meshing cycle velocity is low, the transmission motion force balance, therefore the operation is quiet, and the vibration is quite small.
◆Huge speed ratio and substantial efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission basic principle is adopted, the input shaft and result shaft are on the same axis line, so that the machine version can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts causes the vibration and voice limited to a minimum.
◆Reliable use and very long service life as the primary parts are constructed of large carbon chromium steel, large strength is certainly obtained by quenching (HRC58-62), and rolling friction can be used in a few transmission contacts, so the service life is prolonged.
Cycloid reducer is definitely a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has many advantages, versatile, and may be both negative and positive operation.

•Big ratio, and high efficiency Smooth operation,

• low noise The make use of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically zero wear, durable.

• Compact structure,

• little size Because the application of a planetary transmission, the input shaft and the outcome shaft on the same axis, making the model to obtain the smallest possible size.

• Reasonable design, easy repair, and break down easily install,

• the least number of parts and simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion precision, enhance the output strength and carrier.

(2).Hoop clamp coupling have five connection methods ideal for different application environments.

(3).Size above PL/PF120(incorporating)precision and high power integral inner gear casing, processed in one station,which get rid of the cumulative error and assembling error of split type.Get rid of casting process;adopt warm of forging process, that will reduce the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which much easier to make gear surface area smooth and high precision,reduce the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its efficiency and mounting dime nsions conform the same varieties of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, low noise, compact structure and beautiful shape.
Very good sealing and adaptability.Its mixture with T gear reducer and MB/MBN variator can meet all kinds of speed requirement.

Tags:

shaft car

As one of leading shaft car manufacturers, suppliers and exporters of products, We offer shaft car and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of shaft car

Recent Posts